by ayoi Thu Sep 10, 2009 2:50 pm
guna QUICK SETUP je.. pollow step by step
guna ppoe LLC jika.... enable nat .. yourid@streamyx yourpassword.
save n reboot.
done.
BOOST
Setting up Modems for Streamyx Tips:
1 DSL Technologies
1.1 ADSL
Asymmetric Digital Subscriber Line
ITU G.992.1 - G.DMT - 8.0Mbit/s, 1.0Mbit/s
ITU G.992.2 - G.Lite - 1.5Mbit/s, 0.5Mbit/s
ITU G.992.3/4 - ADSL2 - 12Mbit/s, 1.0Mbit/s
ITU G.992.5 - ADSL2+ - 24Mbit/s, 1.0Mbit/s
1.2 SDSL
Symmetric Digital Subscriber Line
1.3 SHDSL
Symmetric high-speed digital subscriber line
ITU G.991
1.4 VDSL
Very high bit-rate Digital Subscriber Line
ITU G.993.1 - VDSL
ITU-T G.993.2 - VDSL2
2 Signal Level Guide
2.1 ADSL
Downstream SNR = 15 dB.
Higher is better, minimum = 6 dB.
Downstream Power = < 15 dBm.
Lower is better.
Upstream SNR = 10 dB.
Higher is better.
Upstream Power = < 15 dBm.
Lower is better.
Downstream Attenuation = < 30 dB
Lower is better, maximum = 60 dB.
Upstream Attenuation = < 30 dB
Lower is better, maximum = 60 dB.
2.2 ADSL2+
Downstream SNR = 06 dB.
Higher is not better, within range is better = 05 - 07 dB.
Downstream Power = < xx dBm.
Lower is better.
Upstream SNR = 06 dB.
Higher is not better, within range is better = 05 - 07 dB.
Upstream Power = < xx dBm.
Lower is better.
Downstream Attenuation = < 22 dB
Lower is better, maximum = 22 dB (for 10mbps), 12 dB (for ~25mbps).
Upstream Attenuation = < 22 dB
Lower is better, maximum = 22 dB (for 10mbps), 12 dB (for ~25mbps).
3 VPI/VCI ( IMPORTANT ) - Failing to adhere modem won't dial
For Streamyx, VPI = 0 , VCI = 35
Belkin Modems = VPI = 0 , VCI = 35 ( defaults at VPI = 0 , VCI = 38 )
Thomson Modems VPI/VCI = 0.35 ( default at 8.35 )
Username : abc@streamyx ( replace abc with your username )
Password : xxxx ( replace xxx with your password )
CASE STUDIES :
DSL Status: UP
DSL Modulation Mode: GDMT
DSL Path Mode: FAST
Downstream Rate: 1024 Kbps
Upstream Rate: 512 Kbps
Downstream Margin: 22 db <-- berusia 10 tahun keatas line phone ni
Upstream Margin: 8 db
Downstream Line Attenuation: 54
Upstream Line Attenuation: 31
Downstream Transmit Power: 0
Upstream Transmit Power: 0
PVC Connection
Connection: 1
Encapsulation: RFC 2516 PPPoE
Multiplexing: llc
Qos: UBR
Pcr Rate: 0
Scr Rate: 0
Autodetect: Disable
VPI: 0
VCI: 35
Enable: Yes
PVC Status: Applied -- OK
*tukar cable phone anda di dalam rumah start dari punca socket box line phone ( biasa kat belakang umah atau dalam bumbung huh bahaya dalam bumbung leh terbakar ghumah jika ada berlaku panahan kilat. )
jika punca socket dah ada penebat kilat .. kira ok
jika tiada pergi la beli atau call telekom tanya nape umah saya takde penebat kilat phone ?.
tapi elok beli ..power sket
Last edited by ayoi on Thu Sep 10, 2009 3:12 pm; edited 1 time in total
Home
